Standard Installation
Terms & Conditions
- Our fitter will need to fix to brick or plastered wall or any other permanent structure.
- You have selected your Car Charging Point and you understand that it must be located within your designated off-street parking area.
- The charge point should be no more than 10 meters from your consumer unit. If a longer distance is needed, there’s an additional charge per meter. Additionally, the cable route cannot exceed 6 feet above ground; if a higher route is required, an extra charge will apply.
- We cannot run the cable under floorboards or through ducting/ceiling voids/wall voids, or if the floorboards have not been lifted. We can’t take responsibility for reinstating flooring or other building materials after the cable has been laid.
- You understand the cable will be surface mounted and clipped directly back to the surface and it cannot form a potential trip hazard.
- Your consumer unit must be protected by an RCD Type A and have a spare way for the charge point circuit. If it doesn't, don’t worry— We can install a dedicated EV board at a cost of £150 this will be a bidirectional RCBO protected and Surge protected.
- If we are required to drill through walls, they are no thicker than 500mm.